Zoom X6v VoIP - Manual (Page 10)

Note : You must change the VoIP Subsystem IP/DNS configuration settings first to the new subnet if you
change the LAN subnet of your X6v.
HTTP / Telnet / FTP Server
Parameter Description Default
HTTP Server Access Enable Enable or disable access to Configuration
Manager Enabled
HTTP Server Port Assigned port number for HTTP server 8080
Telnet Server Enable Enable or disable remote access via
telnet Enabled
Telnet Server Port Assigned port number for Telnet server 8023
FTP Server Enable Enable or disable remove access via ftp Enabled
FTP Server Port Assigned port number for FTP server 8021
Note : External access may be blocked by your X6v firewall.
STUN Settings
Parameter Description Default
STUN Enable Enables or disables use of STUN for
discovery of Network Address Translation
(NAT) mapping Enabled
STUN Server Address
Fully qualified domain name (including
optional port number) for the STUN server
Firmware and Configuration Update Settings
Parameter Description Default
Update Server Domain Name Fully qualified domain name
(including an optional port number)
for the update server zoom.voipconfigure.com:
5080
Automatic Configuration Update Enable Control to enable automatic
updating of configuration
Enabled
Automatic Configuration Update on
Reboot Control to enable automatic update
of configuration on reset Enabled
Automatic Configuration Update (SIP) Control to enable automatic update
on receipt of SIP message Disabled
Configuration Update Message on
Request
SYSLOG message body sent when
requesting a configuration update Configuration update
requested
Configuration Update Message on
Success SYSLOG message body sent when
configuration update completed
successfully Configuration update
successful
Configuration Update Message on
Failure
SYSLOG message body sent when
configuration update completed
unsuccessfully Configuration update
failed
10 X6v VoIP Features Technical Reference