beautypg.com

Call progress tones, 7 regionalization, Rogress – Zoom X6v VoIP User Manual

Page 24: Ones, Regionalization, 7regionalization

background image

7

Regionalization

You can use the VoIP > Advanced VoIP Setup > Regionalization menu to configure the VoIP Subsystem for
local operating conventions. The menu options include:

Call Progress Tones

Standard Ringing Patterns

Distinctive Ringing Patterns

Distinctive Call Waiting Patterns
Voice and Tone Parameters
SLAC Configuration

SLAC Command Strings

CODEC Configuration

CODEC Command Strings

Other

Note

: In some fields below you might see default values that are valid for the United States only. If you

are reviewing or configuring VoIP settings for other regions, those default values do not apply.

Call Progress Tones

Call progress tones are specified by a list of values indicating the number of tones, number of on/off
transitions, frequency/signal level pairs, and tone on/off times. The format is:

no_of_tones, no_of_times, duration,
{tone_element1_freq, tone_element1_db, tone_element2_freq, tone_element2_db, …},
{tone_on_time1, tone_off_time1, tone_on_time2, …}

where:

no_of_tones

is the number of tone elements that are combined to form a tone. Each tone element

has an associated frequency and amplitude. Up to four tone elements can be combined – to form a
chord, or played in sequence – as a tune (see no_of_times). A negative no_of_tones indicates
that the tones will be synchronized to a two-second timer (relevant for multi-port ATAs only).

no_of_times

is the total of both on-to-off and off-to-on transitions in the tone pattern. If this value is

positive, it produces a composite tone. If it is negative, the tones are played in sequence. Zero
produces a continuous composite tone

duration

is the length of time in seconds that the call progress tone will be played. A value of zero

means that the tone will be played until instructed otherwise.

tone_elementX_freq

and tone_elementX_db represent the frequency (Hz) and signal level (dB) of

each tone. A negative frequency is used to modulate the prior tone components summed together.

24 X6v VoIP Features Technical Reference