Zoom X6v VoIP - Manual (Page 11)

Parameter Description Default
Configuration Update Periodic Delay(s) Periodic delay between configuration
update checks (in seconds - limit
4,294,967,296) 76400
Configuration Update Random Delay(s)
Uniform random delay applied when
contact with the update server fails 240
Configuration Update Error Retry
Delay(s)
Fixed delay applied when the
configuration update operation fails 120
Automatic Firmware Update Enable Control to enable automatic updating
of firmware Enabled
Automatic Firmware Update on Reboot Control to enable automatic update of
firmware on reset Enabled
Firmware Update Message on Request SYSLOG message body sent when
requesting a firmware update
Firmware Update Message on Success SYSLOG message body sent when
firmware update completed
successfully Firmware update
successful
Firmware Update Message on Failure SYSLOG message body sent when
firmware update completed
unsuccessfully Firmware update failed
Firmware Update Periodic Delay(s) Periodic delay between firmware
update checks (in seconds - limit
4,294,967,296) 86400
Firmware Update Random Delay(s) Uniform random delay applied when
contact with the update server fails (in
seconds) 240
Firmware Update Error Retry Delay(s) Fixed delay applied when the
firmware update operation fails (in
seconds) 120
Note : The configuration and/or firmware update periodic delay is by default about a day. This can be
changed to a week by specifying 604,800 seconds, or a month by specifying 2,620,800 seconds.
VoIP System Maintenance
Parameter Description Default
Syslog Enable Enable or disable transmission of
SYSLOG messages Disabled
Syslog Server Address Fully qualified domain name (including an
optional port number) for the SYSLOG
server
Debug Enable Enable or disable transmission of Debug
messages Disabled
Debug Server Address Fully qualified domain name (including an
optional port number) for the Debug
server
Debug Level ATA VoIP Subsystem debug 0
Chapter 3: System Parameters 11