Zoom X6v VoIP - Manual (Page 46)

Parameter Description Default
Block Listed Outgoing Calls Enables or disables the blocking of
outgoing calls from specific numbers in
the Blocked Call List Disabled
Blocked Call List – 01 to 30 numbers Specifies the list of outgoing numbers
Call Waiting/Caller ID
Availability of these features depends on whether they are supported by your VoIP service provider.
Parameter Description Default
Call Waiting Enables or disables call waiting for all
calls. When the line is in use and a call is
received, a call waiting tone is played.
Pressing the flash or the hook button on
the phone momentarily switches between
the two calls. While there are calls on
both lines, additional incoming calls
receive busy signals. Enabled
Inbound Caller ID Enables or disables caller ID for inbound
calls Enabled
Outbound Caller ID Enables or disables caller ID for outbound
calls Enabled
Call Waiting Caller ID Enables or disables caller ID during call
waiting Enabled
Timers
Parameter Description Default
Brief pause (10 ms) Sets the amount of time after picking up
the receiver before dial tone is generated.
(The range is 0 to 65535 in units of 10
ms) 50
(that is, 500 ms)
Initial Dial (10 ms) Specifies amount of time allowed for the
user to dial a digit after picking up the
telephone receiver. (The range is 0 to
65535 in units of 10 ms) 1500
(15 s)
Warm Line (10 ms) Specifies the amount of time from when
the receiver is picked up to the first dialed
digit before Warm Line dialing occurs.
(The range is 0 to 65535 in units of 10
ms) 400
(4 s)
46 X6v VoIP Features Technical Reference