Zoom X6v VoIP - Manual (Page 49)

10
Feature Codes
Feature codes are used to access advanced Class 5 telephony features. You can use the VoIP ->
Advanced VoIP Settings -> Feature Codes menu to configure the parameters. The menu includes:
• Feature Code Assignments (*55 – *99)
Feature Code Assignments (*55 – *99)
The IPBX calling features are assigned the ranges *55 to *89 and *92 to *99. The codes can be re-
assigned to better match common local conventions, but they must be given codes within the assigned
ranges. The default values represent the commonly used assignments.
Parameter Description Default
Call Waiting Enable Enable call waiting on all calls *55
Call Waiting Disable Disable call waiting on all calls *56
Call Trace Call trace (reserved) *57
Call Waiting Caller ID Enable Enable call waiting caller ID generation *58
Call Waiting Caller ID Disable Disable call waiting caller ID generation *59
Blocked Number Enable Enable call blocking feature *60
Distinctive Ring Enable Enable distinctive ringing feature *61
Caller ID Outbound Disable Block caller ID on all outbound calls *62
Priority Forward Enable Enable priority call forwarding feature *63
Disturb Accept Enable Enable do not disturb accept call feature *64
Caller ID Inbound Enable Enable caller ID generation *65
Busy Number Redial Busy number redial *66
Caller ID Outbound One-time Enable Unblock caller ID for one call *67
Caller ID Outbound One-time Disable Block caller ID for one call *68
Caller Redial Call the last caller *69
Call Waiting One-time Disable Deactivate call waiting for current call *70
Call Waiting One-time Enable Enable call waiting for current call *71
Call Forward Enable Enable call forwarding to number that follows *72
Call Forward Disable Cancel call forwarding of non-priority calls *73
One Digit Speed Dial Program Program speed dials 0 - 7 *74
Two Digit Speed Dial Program Program speed dials 20 - 39 *75
Block Anonymous Enable Block all anonymous calls *77
Chapter 10: Feature Codes 49