York MILLENNIUM ND600 - Manual (Page 30)

628767-YTG-C-0910
30 Johnson Controls Unitary Products
Unit Connection Sizes
Model ND360 ND480 ND600 M1CZ600A
Dimensions (inches)
Length 100.1 103.1 103.1 103.1
Width 38.1 45.4 45.5 53.7
Height 74.7 89.4 45.4 54.4
System Data
No. Refrigeration Circuits 2 2 2
Suction Line OD (in.) 1 1/8 1 3/8 - 2 1/8
Liquid Line OD (in.) 7/8 7/8 - 7/8
Power Wiring Knockout 7/8 7/8 1 3/8 -
Control Wiring Knockout 7/8 7/8 7/8 -
Drain Line 7/8 7/8 - 7/8
Blower Outlet
Number 2 2 2 -
Width 19.0 19.0 24.9 -
Length 22.0 22.0 23.0 -
Return Air Inlet
Width 33.2 40.5 - 49.5
Length 95.6 98.5 - 98.5
Minimum Clearances
Top with Supply Air Opening 1
1 This dimension will vary if a supply air plenum or a base is
used.
24”
Front with Return Air Opening 24”
Right Side with access for Piping, Power & Control
Wiring Connections
2
2 This dimension is required for normal installation and service.
24”
Left Side 24”
Rear 3
3
Although no clearance is required for service and operation,
some clearance may be required for routing the power and
control wiring.
N/A
Bottom 4
4 Allow enough clearance to trap the condensate drain line.
N/A
Dimensions Hot Water Coil
Dimensions Hot Water Coil
COIL
MODEL
UNIT
MODEL
DIMENSIONS
A B C D E F
1HW0406 ND360 100-1/8 37-7/8 6-3/4 3-7/8 1-3/8 1-3/8
1HW0407
ND480
ND600
103-1/8 45-1/4 6-1/2 4 1-5/8 1-5/8