Xerox Laser Printer 3500 - Manual (Page 46)

Moving and Repacking the Printer
Phaser® 3500 Laser Printer
41
Some of the LED descriptions and error messages that appear in the control panel are listed
below.
LED Descriptions
The LED indicates the different functioning states of the printer:
Errors and Warnings
The printer displays error or warning messages on the control panel display.
Hardware or software failures that may require service support are presented as errors. When
the printer’s control panel displays an error message, the LED blinks or turns orange. An error
message replaces the status lines.
When an error occurs during printing, the Status Monitor balloon, available only with
Windows on a network-enabled or a USB cable-connected printer, appears on your computer
screen alerting you that the printer needs attention.
Moving and Repacking the Printer
Warning
Follow these guidelines to avoid injuring yourself or damaging the printer.
For safety information, go to Appendix “A–User Safety” in this guide.
Follow these guidelines to move the printer within the office or to prepare the printer for
shipment.
LED Behavior Description
Blinking Green „ Warming up
„ Displaying menus
„ Canceling a job
„ Waiting for more data
„ Processing data
„ Printing pages
Steady Green Ready to print
Steady Orange A major error has occurred and printing has
stopped
Blinking Orange A minor error exists that prevents further printing
without user attention
LED is off „ Power is off
„ Power Saver mode