Figure 43 – Zebra Technologies Zebra S Series 105SL User Manual
Page 99
Routine Maintenance
Cleaning Schedule
11342L Rev. 8 6/4/2004
105SL User Guide
75
Figure 43 • Snap Plate Reinstallation
6.
Slide the snap plate toward you.
7.
Press down on the loops to lock the snap plate into place.
Cutter Module
(For printers equipped with the optional cutter.)
If labels are not being cut properly or if the cutter jams with labels, turn off the printer power
(O) and unplug the printer. Then, clean the stationary cutter blade with cleaning solvent. This
removes label adhesive and/or paper debris. If further cutter cleaning is necessary, or if the
cutter continues to perform unsatisfactorily, contact an authorized service technician.
Note •
Turning off the printer results in the loss of label formats, images, and any temporarily
saved parameter settings stored in the printer’s internal memory. Perform this procedure after
your printing job is complete.
- TLP 2824 (60 pages)
- 400 (78 pages)
- 2824 (21 pages)
- S600 (94 pages)
- Printers (69 pages)
- 2844 Printer (47 pages)
- P310i (43 pages)
- 3742 (30 pages)
- R-140 (126 pages)
- ZEBRA Z4M H-974 (57 pages)
- P520i (2 pages)
- Mobile Printer (40 pages)
- R110XiTM (184 pages)
- XiIII Series (116 pages)
- PrintServer (157 pages)
- Z4000 (98 pages)
- Z SERIES 79695L-002 (156 pages)
- ZEBRA P205 (42 pages)
- 105Se (106 pages)
- 2722 (30 pages)
- XiIIIPlus (40 pages)
- Zebra LP 2824-Z (62 pages)
- ZEBRA XI4TM (190 pages)
- P310C (46 pages)
- R170XI (184 pages)
- R402 (72 pages)
- SL5000r/T5000r (50 pages)
- T402 (62 pages)
- TTP 7030 (128 pages)
- Zebra P330i (66 pages)
- Zebra Z6000 (98 pages)
- XiII-Series (118 pages)
- P1013372-001 REV. A (216 pages)
- ZebraNet ZM600TM (130 pages)
- RW SERIES (84 pages)
- LP 2824 (56 pages)
- TTP 8000 (132 pages)
- ZEBRA QL UMAN-QLP-001 (86 pages)
- LP 2844 (54 pages)
- LP2443 (24 pages)
- RXI SERIES (UHF) (19 pages)
- Zebra P120i (78 pages)
- DA402 (56 pages)
- P320i (49 pages)