Zebra Technologies Zebra S Series 105SL User Manual
Page 80
56
105SL User Guide
6/4/2004 11342L Rev. 8
Configuration
Configuration and Calibration LCD Displays
LCD ADJUST
LCD Display Adjustment: Press the (–) key to decrease the value (reduce brightness);
press the (+) key to increase the value (increase brightness).
Range: 00 to 19
This parameter allows you to adjust the brightness of your LCD if it is difficult to read.
FORMAT
CONVERT
Format Convert: Press the (+) or (–) key to display other choices.
Default: None
Selections:None, 150
→ 300, 150 → 600, 200 → 600, 300 → 600
Selects the bitmap scaling factor. The first number is the original dots per inch (dpi)
value; the second, the dpi to which you would like to scale.
LANGUAGE
Selecting the Display Language
This parameter allows you to change the language used on the front panel display.
Default: English
Selections: English, Spanish, French, German, Italian, Norwegian, Portuguese,
Swedish, Danish, Spanish2, Dutch, Finnish, Japan
1.
Press SELECT to select the parameter.
2.
Press PLUS (+) or MINUS (–) to display other choices.
3.
Press SELECT to accept any changes and deselect the parameter.
Table 6 • Printer Parameters (Sheet 11 of 11)
Parameter
Action/Explanation