Xerox C55/C55mp - Manual (Page 118)

7–8 P R I N T E R M A I N T E N A N C E
Cleaning Procedures
The cleaning procedures described in this section will help you maintain
the optimum print quality and minimize downtime of your C55 printer.
Before you begin, be sure that you have a basic understanding of the parts
of your printer. Also, pay strict attention to the cautions given in each
process.
Cleaning the Print Drum Charger
The Print Drum Charger is a thin wire mesh used to place a charge on the
Print Drum. If this mesh become dirty the Print Drum will not obtain a
proper charge resulting in image quality defects. To clean the Print Drum
Charger, follow the steps below.
1. Open the front and top covers of the printer and locate the Print
Drum.
2. On the top left side of the Print Drum you will see a green thumb tab.
This is the Print Drum Charger cleaner slide.
3. Simply slide this Print Drum Charger cleaner slide back and forth
several times and return it to its original location.