Xerox C55/C55mp - Manual (Page 114)

7–4 P R I N T E R M A I N T E N A N C E
Figure 7–1: Density and Color Balance Adjustment Test Page
The Density and Color Balance Adjustment Test Page contains numbered
image that indicate possible adjustments that can be made. You can
choose to make an adjustment to the Color Density, the Black Density, or
the Color Balance.
Note: While Figure 7-1 is in black and white, the actual Density and
Color Balance Adjustment Test Page is in full color.
The Color Density Images, numbered 1-6 and the current setting show a
lightness/darkness range of three color gray 30% halftones.
The Black Density Images, numbered 7-12 and the current setting show a
lightness/darkness range of black only 30% halftones.
The Color Balance Images, numbered 13-24 and the current setting,
show variations of three color gray. Each of these circles contains gray
with tints of other colors.
21
20
15
14
22
16
13
19
17
18
23
24
Density And Color Balance Adjustment
Test Page
1. Adjust Color Density (30% Halftone): CYAN + MAGENTA + YELLOW
2. Adjust Black Density (30% Halftone): BLACK / GRAYSCALE
3. Adjust Color Balance: Choose The Circle Which Best Matches The Gray Reference
Xerox Corporation, 1996 ver 1.3
Gray Reference
1 5 4 Current 3 2 6
7 8 9 10 11 12 Current
Current
Decrease
Decrease
Increase
Increase
abcdef abcdef abcdef abcdef abcdef abcdef abcdef abcdef