beautypg.com

Loading factory defaults, Communications diagnostics test, Rdglqj )dfwru\ 'hidxowv – Zebra Technologies Z6M User Manual

Page 87

background image

Zebra Z4M/Z6M Printers User’s Guide

79

&RPPXQLFDWLRQV 'LDJQRVWLFV 7HVW

This test is controlled from the front panel display. Refer to page 48. A typical
printout from this test is shown in Figure 33. Turn off the power to exit this self test.

NOTE: This label is inverted when printed.

/RDGLQJ )DFWRU\ 'HIDXOWV

1. Press the SETUP/EXIT key two times.

2. Use the INCREMENT (+) or DECREMENT (–) key to scroll through the “SAVE

CHANGES” choices.

3. When “LOAD DEFAULTS” displays, press the SETUP/EXIT key.

Figure 33

See also other documents in the category Zebra Technologies Printers: