Zebra Technologies Z6M - Manual (Page 23)

Zebra Z4M/Z6M Printers User’s Guide 15
&RQILJXULQJ WKH 6RIWZDUH RU 3ULQWHU 'ULYHU
Many printer settings may also be controlled by your printer’s driver or label
preparation software. Refer to the driver or software documentation for more
information.
3ULQWLQJ D 7HVW /DEHO
To print a test label:
1. Turn off the printer.
2. Press and hold the CANCEL key while turning on the printer.
3. Release the CANCEL key after the DATA light turns off (approximately five
seconds).
A configuration label prints
showing the printer’s
currently stored parameters
(similar to the labels shown
in Figure 10).
If you encounter any
problems while you are
configuring the printer or
printing a test label, refer to
“Troubleshooting” beginning
on page 69. Otherwise, refer
to See “Establishing
Communication” beginning
on page 17 to set up the
communication parameters.
Figure 10