ZyXEL Communications ES-3124 - Manual (Page 247)

Chapter 30 Access Control
ES-3124 Series User’s Guide
247
30.3.4 Configuring SNMP
From the Access Control screen, display the SNMP screen. You can click Access Control to
go back to the Access Control screen.
Figure 145 Management > Access Control > SNMP
mactable MacTableFullEventOn ES-3124:
1.3.6.1.4.1.890.1.5.8.12.27.2.1
ES-3124 PWR:
1.3.6.1.4.1.890.1.5.8.14.27.2.1
ES-3124-4F:
1.3.6.1.4.1.890.1.5.8.26.32.2.1
ES-3124F:
1.3.6.1.4.1.890.1.5.8.31.32.2.1
This trap is sent when more than
99% of the MAC table is used.
MacTableFullEventClear ES-3124:
1.3.6.1.4.1.890.1.5.8.12.27.2.2
ES-3124 PWR:
1.3.6.1.4.1.890.1.5.8.14.27.2.2
ES-3124-4F:
1.3.6.1.4.1.890.1.5.8.26.32.2.2
ES-3124F:
1.3.6.1.4.1.890.1.5.8.31.32.2.2
This trap is sent when less than
95% of the MAC table is used.
rmon RmonRisingAlarm 1.3.6.1.2.1.16.0.1 This trap is sent when a variable
goes over the RMON "rising"
threshold.
RmonFallingAlarm 1.3.6.1.2.1.16.0.2 This trap is sent when the variable
falls below the RMON "falling"
threshold.
Table 103 SNMP Switch Traps (continued)
OPTION OBJECT LABEL OBJECT ID DESCRIPTION