Xerox 470 - Manual (Page 95)

Xerox Document Centre Reference Guide Page 5 - 9
5. F
a
x
(Opti
o
nal
Fea
ture
)
5
. F
ax (Op
ti
o
nal
Fe
at
ur
e)
Pulse-to-Tone Switch [:]
Use to switch from pulse dialing to tone or touch-tone dialing. After
switching from pulse to tone, you cannot switch back to the original
mode during the fax operation. You might need to use pulse mode
to make the connection and tone mode to access a mailbox. Dial the
number and wait for instructions. After the call is answered and the
greeting is heard, you are prompted to press 1 (or some other
designated character) if you are calling from a touch-tone phone.
When the designated character is selected, the system switches from
pulse to tone.
Local ID [+] Character Check [+]
This may be required as part of some international telephone
numbers (n + place of 00).
Local ID [space] Character Check []
This is used to improve readability. For example, adding spaces to a
telephone number as 1 234 5678 instead of 12345678.
Begin DTMF [*]
This will allow the user to enter DTMF Dual Tone characters in a
fax number from the Local User Interface in a fax number.
End DTMF [#]
This will allow the user to end DTMF Dual Tone characters in a fax
number from the Local User Interface in a fax number.
NOTE The [*] and [#] buttons are located on the Document Centre
keypad.