Xerox 470 - Manual (Page 312)

Page 16 - 4 Xerox Document Centre Reference Guide
Print to Edge This feature allows the Document Centre to print an image
anywhere on the paper up to and including the very edge of the paper
stock.
Registration This term refers to the location of either the document as it is placed
on the Document Glass or in the Document Feeder. It can also refer
to the placement of the image as it appears on the output.
Resolution Quantifying the quality of print in terms of the number of dots per a
given area (typically an inch).
Scanning Sensing the image on an original and creating an electronic image of
the document.
Scan Once, Print
Many This Document Centre Feature enables the single scanning of a
document, regardless of the number of copies requested. After the
document is scanned once, it is Raster Image Processed (RIP) once,
temporarily stored to the image disk until the job is completed, then
the image is deleted.
Short Edge Feed
(SEF) As the paper is fed into the machine from either the Document
Feeder or any of the Paper Trays, the shortest edge of the paper
enters the machine first.
Sharpness Sharpness adjusts the amount of edge definition on the output. If the
image appears slightly out of focus, increasing the Sharpness value
may make the image clearer.
Stock See Media
System Administrator This person connects the Document Centre to the network so it can
print jobs from your work station.
TIFF This is the abbreviation for Tagged Image Format File. It is a
common industry standard.