Xerox 470 User Manual
Page 110
Page 6 - 8
Xerox Document Centre Reference Guide
Destination
The destination area shows where the template will send the
processed scan job. Unlike the other scanning options, this address
is not changeable at the machine. To change a template destination,
you must either edit the existing template or create a new template
using either the CentreWare™ Template utility or Internet Services.
Sides Scanned
This option allows you to select which sides will be scanned. You
can choose from 1 sided, 2 sided or 2 sided Rotate Side 2.
It also allows to you orient your scanned image to better facilitate
processing by applications using Optical Character Recognition
(OCR). In the event you select the incorrect image orientation
button, most OCR application software will allow you to reorient it.
Press this button if the bottom of your
original will enter the Document Feeder first.
This is independent of portrait and landscape
and Long Edge or Short Edge Feed.
Press this button if you can read your
originals as they lay in the Document Feeder.
This is independent of portrait and landscape
and Long Edge or Short Edge Feed.