ZyXEL Communications P-202 - Manual (Page 49)

P-202H Plus v2 Support Notes
Version= RIP-2B
Edit IP Alias= No
2. Remote Node Setup in SMT Menu 11
Menu 11.1 - Remote Node Profile
Rem Node Name= LAN2 Edit PPP Options= No
Active= Yes Rem IP Addr= 203.66.113.1
Call Direction= Outgoing Edit IP= No
Incoming: Telco Option:
Rem Login= Transfer Type= 64K
Rem Password= Allocated Budget(min)=
Rem CLID= N/A Period(hr)=
Call Back= N/A Schedules=
Outgoing: Carrier Access Code=
My Login= test Nailed-Up Connection= No
My Password= ******** Toll Period(sec)= 0
Authen= CHAP/PAP Session Options:
Pri Phone #= 5007025 Edit Filter Sets= No
Sec Phone #= Idle Timeout(sec)= 100
Press ENTER to Confirm or ESC to Cancel:
Key Settings:
o
Select the 'Active' field to 'Yes'
o
Select the 'Call Direction' to 'Outgoing'
o Enter the correct node account in 'My Login' and 'My Password'
fields
o Enter the phone number of the remote router in the 'Pri Phone #'
field
o Enter the IP address of the remote router in 'Rem IP Addr' field
o
Enter the idle timer in the 'Idle Timeout' field for dropping the call if
there is no data traffic between the two remote nodes
• P-202H Plus v2 2 Setup
1. Ethernet Setup in SMT Menu 3
All contents copyright © 2006 ZyXEL Communications Corporation.
49