Zoom 8080 - Manual (Page 62)

This delay effect samples a phrase and repeats it. When the CONTROL switch is pressed once, the sound is sampled for
the preset delay time. Pressing the CONTROL switch again causes the phrase to be repeated.
Vintage analog delay type sound with depth and body.
VANA: Vintage Analog Delay
HOLD: Hold Delay
61 ■
UTILITY
PAGE
VANA TIM= (ms)
FB= Mix=
VANA
RTMå CSW=
3 4
1 2
MAX MIN
MAX MIN MAX MIN
MAX MIN
q w
e r
3 4
1 2
MAX MIN
MAX MIN MAX MIN
MAX MIN
t y
PAGE 1
PAGE 2
q w
e
r
t y
q TIM (Time) Set the delay time in 100-ms steps. 0 – 10 (x100)
w (mS) (Time Fine) Fine adjusts the delay time in 1-ms steps. 0 – 99
e FB (Feedback) Sets the feedback amount. 0 – 10
r Mix (Mix) Adjusts the mix between original sound and
effect sound.
0 – 100
t RTM (RTM Destination) Shows which RTM parameter is being controlled. Mix
y CSW (CSWselect) Sets the CONTROL switch function to "Mix"
(balance between original sound and effect sound)
or "Tap" (tapping input of delay time).
Mix, Tap
Parameters Comment Values
UTILITY
PAGE
HOLD TIM=
FB= Mix=
HOLD
RTMå CSWå
3 4
1 2
MAX MIN
MAX MIN MAX MIN
MAX MIN
q w
e r
3 4
1 2
MAX MIN
MAX MIN MAX MIN
MAX MIN
t y
PAGE 1
PAGE 2
q (mS) w
e r
t y
q TIM (Time) Set the delay time in 100-ms steps. 0 – 40 (x100)
w (mS) (Time Fine) Fine adjusts the delay time in 1-ms steps. 0 – 99
e FB (Feedback) Sets the feedback amount. 0 – 10
r Mix (Mix) Adjusts the mix between original sound and
effect sound.
0 – 100
t RTM (RTM Destination) Shows which RTM parameter is being controlled. Mix
y CSW (CSWselect) Shows the parameter that is being controlled by
the CONTROL switches.
HLD
Parameters Comment Values
Effect
Types
and
Parameters