Zoom 8080 - Manual (Page 45)

■ 44
Advanced
Operation
Returning the 8080 to the factory default condition
Turn the 8080 off.
(Turn the amplifier
volume to minimum.)
1
Turn the 8080 on while
holding the
depressed.
STORE/EXECUTE key
2
Press the
once
more.
The 8080 goes into standby for
"ALL-INITIALIZE". STORE/EXECUTE key
3
To carry out "ALL-
INITIALIZE", press the
.
All settings of the 8080 are reset to
the factory default condition.
STORE/EXECUTE key
4
CONTROL
PEDAL
CONTROL
PEDAL
CONTROL
SWITCH
DECREASE
–(TAP/HOLD)
INCREASE
BANK
MAX
CONTROL SWITCH INDICATOR
1/2
MIN
BLINK
(DLY:TAP)
COMP EFF1 DIST EQ EFF2 EFF3 DLY REV TOTAL
EDIT
EXIT
PRESENCE OUTPUT
GROUP COMPARE
FINE TUNE
Super ADVANCED GUITAR EFFECTS PROCESSOR
STORE (EXECUTE)
3 4
1 2
MAX MIN
MAX MIN MAX MIN
MAX MIN
UTILITY PAGE
USER
FUNCTION
TYPE – + 1, 3, 4
Display Beacon
STORE/EXECUTE key
STORE
(EXECUTE)
If you wish to cancel the initialize process, press the EDIT/EXIT key instead of pressing the STORE/EXECUTE key a second
time.
NO
✎
You can return all settings of the 8080 including all USER group patches to the factory default condition. This is
useful for example if you have inadvertently erased the contents of a USER group patch.
ALL INITIALIZE
PLEASE EXECUTE Key
POWER
POWER
A L
> ALL INITIALIZE <
ENTER EXECUTE EXIT ||
01 8080LEAD LVL=100
AMP ¡VOL ™OFF ßHLD
OFF
ON