Zoom 8080 - Manual (Page 54)

Recreates a popular, solid-sounding fuzz effect.
Distortion with prominent midrange, ideal for lead guitar.
Distortion effect most suitable for heavy metal, with strong emphasis on bass and treble.
MTL: Metal Distortion
LEAD: Lead Driver
VFzF: Vintage Fuzz F
53 ■
Effect
Types
and
Parameters
UTILITY
PAGE
VFzF FUZ=
LVL= ZNR=
VFzF
RTMå DIR=
3 4
1 2
MAX MIN
MAX MIN MAX MIN
MAX MIN
q
w e
3 4
1 2
MAX MIN
MAX MIN MAX MIN
MAX MIN
r t
PAGE 1
PAGE 2
q
w
e
r t
q FUZ (Fuzz) Sets the distortion type. 1 – 30
w LVL (Level) Sets the output level. 1 – 16
e ZNR (ZNR) Sets the activation threshold for Zoom Noise Reduction
which suppresses noise during no-signal passages.
The key to effective use of ZNR is setting the value
as high as possible without causing the noise cutoff to
sound unnatural. ZNR can be used also when the
DIST module is off.
0ff, 1 – 10
r RTM (RTM Destination) Shows which RTM parameter is being controlled. FUZ
t DIR (RTM Direction) Sets the RTM direction. NML, INV
Parameters Comment Values
UTILITY
PAGE
LEAD DRV= EQ=
LVL= ZNR=
LEAD
RTMå DIR=
3 4
1 2
MAX MIN
MAX MIN MAX MIN
MAX MIN
q w
e r
3 4
1 2
MAX MIN
MAX MIN MAX MIN
MAX MIN
t y
PAGE 1
PAGE 2
q w
e r
t y
q DRV (Drive) Sets the distortion type. 1 – 30
w EQ (EQ) Sets the tonal quality. Higher values emphasize the
treble range and lower values cut the treble range. -10 – +10
e LVL (Level) Sets the output level. 1 – 16
r ZNR (ZNR) Sets the activation threshold for Zoom Noise Reduction
which suppresses noise during no-signal passages.
The key to effective use of ZNR is setting the value
as high as possible without causing the noise cutoff to
sound unnatural. ZNR can be used also when the
DIST module is off.
0ff, 1 – 10
t RTM (RTM Destination) Shows which RTM parameter is being controlled. DRV
y DIR (RTM Direction) Sets the RTM direction. NML, INV
Parameters Comment Values
UTILITY
PAGE
MTL DRV= EQ=
LVL= ZNR=
MTL
RTMå DIR=
3 4
1 2
MAX MIN
MAX MIN MAX MIN
MAX MIN
q w
e r
3 4
1 2
MAX MIN
MAX MIN MAX MIN
MAX MIN
t y
PAGE 1
PAGE 2
q w
e r
t y
q DRV (Drive) Sets the distortion type. 1 – 30
w EQ (EQ) Sets the tonal quality. Higher values emphasize the
treble range.
-10 – +10
e LVL (Level) Sets the output level. 1 – 16
r ZNR (ZNR) Sets the activation threshold for Zoom Noise Reduction
which suppresses noise during no-signal passages.
The key to effective use of ZNR is setting the value
as high as possible without causing the noise cutoff to
sound unnatural. ZNR can be used also when the
DIST module is off.
0ff, 1 – 10
t RTM (RTM Destination) Shows which RTM parameter is being controlled. DRV
y DIR (RTM Direction) Sets the RTM direction. NML, INV
Parameters Comment Values