Overdubbing – Yamaha AW 1600 User Manual
Page 58
AW1600 Owner’s Manual
Overdubbing
6
Ov
erdub
bing
58
Now you can overdub onto the track that you selected as the recording-destination.
1
In the Work Navigate section, repeatedly
press the [TRACK] key or hold down the
[TRACK] key and use the CURSOR [
]/[
]
keys to access the VIEW page.
2
Move the cursor to the metronome button,
and press the [ENTER] key to switch the
setting on or off as desired.
You can perform overdubbing whether the metronome
is on or off.
3
In the transport section, hold down the REC
[
●] key and press the PLAY [ ] key.
The metronome will begin sounding, and the counter
display will advance.
4
While monitoring the previously-recorded
tracks, play the instrument that you want to
overdub.
5
To stop recording, press the STOP [
■] key.
The [UNDO/REDO] key in the data entry / control
section will light.
6
To listen to the recorded performance from
the beginning, press the RTZ [
] key to
return the counter display to zero, and
press the PLAY [
] key.
7
If you are satisfied with the recorded perfor-
mance, save the song. (For details on sav-
ing
If you decide to re-do the recording, press the [UNDO/
REDO] key to cancel the recording, and repeat steps
3–7.
Overdubbing
• If you recorded from the middle of the song, you can press the
[IN] key to move to the location at which you began recording.
HINT