Exchange, Time comp/exp (time compression/expansion), Exchange time comp/exp – Yamaha AW 1600 User Manual
Page 134: Time compression/expansion), Parameter list, For an audio track
AW1600 Owner’s Manual
List of editing commands
12
Tr
ac
k editing
134
Exchanges data between the specified tracks.
● For an audio track
Adjusts the length of the specified region of an audio
track, without changing the pitch.
● If you set Ratio = 50%
● If you set Ratio = 200%
Parameter
Range
Explanation
1
From TR
1–16
A single audio track
1/2–15/16
A pair of adjacent odd-numbered/
even-numbered audio tracks
ST
The stereo track
2
From V.TR
1–8
Exchange-source virtual track
number
3
Name
Up to eight
alphanumeric
characters
Exchange-source virtual track
name (display only)
4
To TR
*1
*1. The items that you can select in
4
To TR (copy-destination track)
will depend on the
1
From TR (copy-source track) setting.
If
1
From TR is a single audio track 1–16, you can select only a sin-
gle audio track 1–16.
If
1
From TR is ST or 1/2–15/16 (a pair of adjacent audio tracks),
you can select only 1/2–15/16 (a pair of adjacent audio tracks).
1–16
A single audio track
1/2–15/16
A pair of adjacent odd-numbered/
even-numbered audio tracks
5
To V.TR
1–8
Exchange-destination virtual
track number
6
Name
Up to eight
alphanumeric
characters
Exchange-destination virtual
track name (display only)
EXCHANGE
4
6
5
1 2
3
EXCHANGE
From
Track
To
Track
From
Track
To
Track
1 2 3 4 5 6
A B C D E F
1 2 3 4 5 6
A B C D E F
■ Parameter list
• The track names will not be exchanged.
NOTE
Parameter
Range
Explanation
1
From TR
1–16
A single audio track
1/2–15/16
A pair of adjacent odd-numbered/
even-numbered audio tracks
ST
The stereo track
2
From V.TR
1–8
Virtual track number
3
From Start
Specify a point
Beginning of the edited region
4
From End
Specify a point
End of the edited region
5
To End
Specify a point
Specify the length to which the
selected region will be com-
pressed or expanded
6
To Ratio
50–200%
Specify the percentage by which
the selected region will be com-
pressed or expanded
TIME COMP/EXP
(Time Compression/Expansion)
5
6
1 2
3 4
TIME
COMP/EXP
From End
1 2 3 4 A B C D
1
2 3 4
A B C D
From Start
To END
TIME
COMP/EXP
From End
1 2 3 4 A B C D
1
C D
From Start
To END
2 3
4
■ Parameter list
• To End and To Ratio are linked, so that editing one field will cause
the other field to change.
• You cannot set To End or To Ratio to a value that would cause the
ratio to exceed 50–200 percent.
• From Start value and From End value must be at least 45 msec
apart. These cannot be set to a shorter interval.
NOTE