Xerox DocuColor 7000 EN - Manual (Page 68)

DocuColor 8000/7000 Operator Manual 2-12
2. Paper and paper trays
Auto Tray Switching
When Auto Tray Switching (ATS) is activated in the Tools Mode,
the digital press automatically switches to another tray containing
paper of the identical size, weight, type, and feeding orientation
(SEF or LEF) when the tray being used is empty.
Refer to the System Administration Guide for the instruction on
enabling ATS.
Auto Paper Selection
Auto Paper Selection (APS) can be enabled in the Tools
Mode. When enabled, the digital press automatically selects the
paper tray containing the correct size paper without a specific
paper tray being selected.
Refer to the System Administration Guide for information on how
to enable Auto Paper Selection or to select a particular tray as the
default setting.
When the Single Paper Weight setting in Tools Mode is selected
as the default setting, Auto Paper selects only 81-105 g/m
2
paper
in the correct size. When the Mixed Paper Weight Productivity
Setting is enabled, Auto Paper selects only 106-135 g/m
2
paper in
the correct size.