Common stacker/stapler (css), Identifying css parts, Common stacker/stapler (css) -41 – Xerox DocuColor 7000 EN User Manual
Page 115: Identifying css parts -41
DocuColor 8000/7000 Operator Manual
3-41
3. Accessories
Common Stacker/Stapler (CSS)
The Common Stacker/Stapler (CSS) is an optional finishing device
which provides stacking with offset and single or dual stapling
output capabilities. Sets of up to fifty sheets of 64-80 g/m
2
may be
stapled.
The CSS must be connected to the right end of the digital press,
replacing the Offset Catch Tray. The CSS Stack Tray has a
capacity of 2000 sheets of 17-21 lb. (64-80 g/m
2
) paper. The
stacker/stapler also has an Offset mode which provides
separation between the stacked sets sent to the CSS Stack Tray.
The stacker/stapler can also send output (not stapled) of 250
sheets of 17-21 lb. (64-80 g/m
2
) paper to the CSS Top Tray.
Banner sheets can be used with your color server. The banner
sheets must be printed on LEF 8.5 x 11 in. paper. Refer to your
color server manual for more information on how to turn this
feature on.
Identifying CSS Parts
Top Tray
Offset
Stacker/
Stapler
Tray