Westell Technologies 2200 - Manual (Page 98)

030-300354 Rev. B 94 July 2003
Section 14-Maintenance
Westell Dual Connect NAT Router User Guide
14.3 Change Password
The following settings will be displayed if you select Change Password from the Maintenance menu.
After you enter your data into the appropriate settings, click on change.
Enter Administrative Name
NOTE: This changes the Systems Administrator
password not the PPP password. Type the name of your network administrative.
Enter Administrative Password Type your network administrator’s password.
Verify Administrative Password Re-type your network administrator’s password.
14.4 Remote Access
The following screen will appear if you select Remote Access from the Maintenance menu. To enable Remote
Access, type in a password and click the enable remote access button.
NOTE: The password should be at least 4 characters long and should not exceed 32 characters. Do not type a blank
space or asterisks in the Password field. The password is also case sensitive.