Westell Technologies 2200 - Manual (Page 92)

030-300354 Rev. B 88 July 2003
Section 13-Setting Up Advanced Service Configuration
Westell Dual Connect NAT Router User Guide
13.4 Adding Local Trigger Ports
If you made changes in the Local ‘Trigger’ Port Range screen and clicked next, the following screen will be
displayed. You may either click on close to accept the changes, or click on add to go back to the Trigger Ports
screen, enter additional port range values, and click on next. You can repeat this step for each port range that you
want to add (up to 10 trigger ports). When you are finished adding ports to the Local ‘Trigger” Port Range, you must
click on close to accept the information you have entered and to return to the Service Configuration screen.