System requirements, Minimum system requirements for usb installation, 2 minimum system requirements for usb installation – Westell Technologies 2200 User Manual
Page 8

030-300354 Rev. B
4
July 2003
Section 4-System Requirements
Westell Dual Connect NAT Router
User Guide
4. SYSTEM REQUIREMENTS
4.1 Minimum System Requirements for 10/100 Base-T/Ethernet Installation
The following system specifications are required for optimum performance of the Dual Connect NAT Router via
10/100 Base-T installation:
• Pentium
®
or equivalent and above class machines, Macintosh
• Microsoft
®
Windows
®
(98, 2000, ME, NT 4.0, or XP) or
Macintosh
®
OS X installed
• Computer Operating System CD-ROM on hand
• Internet Explorer 4.x or Netscape Navigator 4.x or higher
• 64 MB RAM (128 MB recommended)
• 10 MB of free hard drive space
• TCP/IP Protocol stack installed
• 10/100 Base-T Network Interface Card (NIC)
4.2 Minimum System Requirements for USB Installation
The following system specifications are required for optimum performance of the Dual Connect NAT Router via
USB installation:
• Pentium
®
or equivalent and above class machines
• Microsoft
®
Windows
®
98, 2000, ME, or XP installed
• Computer Operating System CD-ROM on hand
• Internet Explorer 4.x or Netscape Navigator 4.x or higher
• 64 MB RAM (128 MB recommended)
• 10 MB of free hard drive space
• USB Version 1.0 or 1.1 compliant bus
• An available USB Port