Westell Technologies 2200 - Manual (Page 71)

030-300354 Rev. B 67 July 2003
Section 12-Configuration
Westell Dual Connect NAT Router User Guide
Once WAN Detect has completed, the following screen will be displayed. This screen displays the protocol types
detected in your VPI/VCI settings.
12.7 Single Static IP Configuration
The following settings will be displayed if you select Single Static IP Configuration from the Configuration
menu.
STOP: Static NAT must be disabled before you can enable Single Static IP. To disable Static NAT, select Service
Configuration from the Configuration menu. Next, click on the static NAT button. Select the device from the
Static NAT Device pull-down menu and click on disable. Return to Single Static IP Configuration by selecting
Single Static IP Configuration from the Configuration menu.
The actual information displayed in this screen may vary.
0/35