Westell Technologies 2200 - Manual (Page 72)

030-300354 Rev. B 68 July 2003
Section 12-Configuration
Westell Dual Connect NAT Router User Guide
12.7.1 Enabling Single Static IP Configuration
To enable Single Static IP, click on the device (from the options listed in the window) that will share your Single
Static IP. Click on enable.
NOTE: The Single Static IP Configuration screen allows you to select the device on your LAN that will share your
Single Static IP.
If you clicked on enable, the following pop-up screen will appear. Click on OK to enable this device for Single
Static IP. Click on Cancel if you do not want to enable Single Static IP.
NOTE: The actual information displayed in this screen may vary.