Western Telematic RPC-4840N - Manual (Page 34)

2. Switch Circuit(s) On: To power-on a circuit, type /ON n
and press [Enter]. Where "n" is the number or name of
the desired circuit.
Examples:
· To power-on both circuits, type /ON * and
press [Enter].
· To power-on Circuit 1, type /ON 1 and press [Enter].
3. Switch Circuit(s) Off: To power-off a circuit, type /OFF
n and press [Enter]. Where "n" is the number or name of
the desired circuit. Note that the "/OFF" command can
also be entered as "/OF".
Examples:
· To power-off both circuits, type /OFF * or /OF * and
press [Enter].
· To power-off a circuit named POWER2, type
/OFF POWER2 or /OF POWER2 and press [Enter].
4. Suppress Command Confirmation Prompt: To execute a
Boot/On/Off command without displaying the "Sure?"
prompt, include the ",Y" option in the command line. The
",Y" option is entered immediately following the
command argument.
Examples:
· To boot both circuits without displaying the "Sure?"
prompts, type /BOOT *,Y or /BO *,Y and then
press [Enter].
· To power-off a circuit named POWER1 without
displaying the "Sure?" prompt, type /OFF POWER1,Y
or /OF POWER1,Y and then press [Enter].
6-4
RPC-4840N Remote Power Controller; User's Guide