Western Telematic RPC-4840N - Manual (Page 21)

5-3
Configuration
Remote Power Controller v2.0 Site: WESTERN TELEMATIC, INC.
Commands:
Display
/H Display this help screen
/S[P] Display Ckt. Status, [P] with passwords
Configuration
/G View/Set General Parameters
/P [n] View/Set Ckt. Parameters
/N View/Set Network Parameters
/DL Download configuration to file
Control +------------------------------------+
/D Set Ckts. to default setting | [n] = optional Ckt. name or number |
/Boot Boot Ckt. n | = required Ckt. name or number |
/On Turn On Ckt. n | n+n = Ckt. n and Ckt. n |
/Off Turn Off Ckt. n | n:n = Ckt. n through Ckt. n |
/T Reset Network Interface | * = all Ckts. with access |
/R Relogin as different user +------------------------------------+
/X Exit/Disconnect
RPC>
Figure 5.1: System Help Screen
Remote Power Controller v2.0 Site: WESTERN TELEMATIC, INC.
Commands:
Display
/H Display this Help Screen
/S Display Ckt. Status
Control
/D Set Ckts. to Default Settings
/Boot Boot Ckt. n
/On Turn On Ckt. n
/Off Turn Off Ckt. n
/X Exit/Disconnect
+------------------------------------+
| = Required Ckt. Name or Number |
| n+n = Ckt. n and Ckt. n |
| n:n = Ckt. n through Ckt. n |
| * = All Ckts. with Access |
+------------------------------------+
RPC>
Figure 5.2: User Help Screen