VIEWSONIC XGA LCD PROJECTOR pjl9371 - Manual (Page 50)

PJL9371 ViewSonic 45
OPTION menu
Item Description
SERVICE
Selecting this item displays the SERVICE
menu.
Select an item using the ▲/▼ cursor
buttons, and press the ► cursor (or the
ENTER) button on the remote control
to execute the item.
FAN SPEED
Using the ▲/▼ cursor buttons switches the rotation speed of the
cooling fans. The HIGH is the mode for use at highlands etc. Note
that the projector is noisier when the HIGH is selected.
HIGH ó NORMAL
AUTO ADJUST
Using the ▲/▼ cursor buttons to select one of the mode. When the
DISABLE is selected, the automatic adjustment feature is disabled.
FINE ó FAST ó DISABLE
FINE: Finer tuning including the H.SIZE adjustment.
FAST: Faster tuning, setting the H.SIZE to prearranged data for
the input signal.
• Depending on conditions, such as input image, signal cable to
the projector, environment around the projector, etc., the automatic
adjustment may not work correctly. In such a case, please choose
the DISABLE to disable the automatic adjustment, and make
adjustment manually.
GHOST
1. Select a color element of ghost using
the ◄/► cursor buttons.
2. Adjust the selected element using the ▲
/▼ cursor buttons to disappear ghost.
FILTER MESSAGE
Use the ▲/▼ cursor button to set the timer for notifying by the
message when to replace the filter unit
500h ó 1000h ó 2000h ó 3000h ó 4000h ó 5000h ó OFF
After choosing an item except the OFF, the message the
“REMINDER ***HRS PASSED .....” will appear after the timer
reaches the interval time set by this feature.
When the OFF is chosen, the message will not appear. Utilize
this feature to keep the air filter clean, setting the suitable time
according to your environment of this projector.
• Please take care of the filter unit periodically, even if there is
no message. If the air filter becomes to be blocked by dust or
other matter, the internal temperature will rise, which could cause
malfunction, or reduce the lifetime of the projector.
• Please be careful with the operating environment of the projector
and the condition of the filter unit.
(continued on next page)