VIEWSONIC XGA LCD PROJECTOR pjl9371 User Manual

Page 45

PJL9371

ViewSonic

SCREEN menu

Item

Description

SOURCE NAME

Each input port for this projector can have a name applied to it.

(1) Use the ▲/▼ cursor buttons on the SCREEN menu to select the

SOURCE NAME and press the ► cursor (or the

ENTER) button.

The SOURCE NAME menu will be displayed.

(2) Use the ▲/▼ cursor buttons on the

SOURCE NAME menu to select the port

to be named and press the ► cursor

button. Right side of the menu is blank

until a name is specified.

The SOURCE NAME dialog will be

displayed.

(3) The current name will be displayed

on the first line. Use the ▲/▼/◄/►

cursor buttons and the

ENTER (or

the

INPUT)button to select and enter

characters. To erase 1 character at one

time, press the

RESET (or press the

◄ cursor and the

INPUT buttons at the

same time) button. Also if you move

the cursor to the DELETE or the ALL

CLEAR on screen and press the

ENTER

(or the

INPUT) button, 1 character or all

characters will be erased. The name can

be a maximum of 16 characters.

(4) To change an already inserted character, press the ▲ cursor

button to move the cursor to the first line, and use the ◄/►

cursor buttons to move the cursor on the character to be

changed.

After pressing the

ENTER (or the INPUT) button, the character

is selected. Then, follow the same procedure as described at

the item (3) above.

(5) To finish entering text, move the cursor to the OK on screen

and press the ► cursor (or the

ENTER / the INPUT) button. To

revert to the previous name without saving changes, move the

cursor to the CANCEL on screen and press the ◄ cursor (or the

ENTER / the INPUT) button.

TEMPLATE

Using the ▲/▼ cursor buttons switches the mode for the template

screen.

Press the ►

cursor (or the ENTER) button to display the selected

template, and press the ◄ cursor button to close the displayed

screen.

The last selected template is displayed when the

MY BUTTON

allocated to the TEMPLATE function is pressed.

TEST PATTERN ó DOT-LINE1

DOT-LINE4 ó DOT-LINE3 ó DOT-LINE2

(continued on next page)