VIEWSONIC XGA LCD PROJECTOR pjl9371 - Manual (Page 38)

PJL9371 ViewSonic 33
INPUT menu
Item Description
RESOLUTION
The resolution for the COMPUTER IN1 and the COMPUTER IN2
input signals can be set on this projector.
In the RESOLUTION menu select the resolution you wish to display
using the ▲/▼ cursor buttons.
■AUTO
Selecting AUTO will set a resolution
appropriate to the input signal.
■STANDARD
Pressing the ► cursor (or the ENTER) button
when selecting a STANDARD resolution
will automatically adjust the horizontal and
vertical positions, clock phase and horizontal
size.
The INPUT_INFORMATION dialog will be
displayed.
■CUSTOM
(1) To set a custom resolution use the ▲/▼ cursor buttons to select
the CUSTOM and the RESOLUTION_CUSTOM box will be
displayed.
Set the horizontal (HORZ) and
vertical (VERT) resolutions using
the ▲/▼/◄/► cursor buttons.
This function is may not support all
resolutions.
(2) Move the cursor to the OK on screen and press the ► cursor (or
the ENTER) button. The message "ARE YOU SURE YOU WISH
TO CHANGE RESOLUTION?" appears. To save the setting,
press the ► cursor button.
The horizontal and vertical positions, clock phase and horizontal
size will be automatically adjusted.
To revert back to the previous resolution
without saving changes, move the cursor
to the CANCEL on screen and press the
◄ cursor (or the ENTER) button.
The screen will then return to the
RESOLUTION menu displaying the
previous resolution.
• For some pictures, this function may
not work well.
STANDARD
↓
CUSTOM
↓