VIEWSONIC XGA LCD PROJECTOR pjl9371 - Manual (Page 40)

PJL9371 ViewSonic 35
SETUP menu
Item Description
MIRROR
Using the ▲/▼ cursor buttons switches the mode for mirror status.
NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT
If the Transition Detector is on and the MIRROR status is changed,
the TRANSITION DETECTOR ON alarm will be displayed when
projector is restarted after the AC power is turned off.
STANDBY MODE
Using ▲/▼ cursor buttons switches the standby mode setting
between the NORMAL and the SAVING.
NORMAL ó SAVING
When the SAVING is selected, the power consumption in the
standby state is lowered with some functional restriction as below:
• When the SAVING is selected, the RS-232C communication
control is disabled except to turn the projector on while the projector
is in the standby state.
• When the SAVING is selected, the AUDIO OUT STANDBY setting
of the AUDIO SOURCE is invalid, and no signal is output from the
AUDIO OUT ports in the standby state.
MONITOR OUT
The combination of a picture shown on screen and output from the
MONITOR OUT port can be arranged in the menu.
The picture coming into the port selected in the (2) is output to the
MONITOR OUT port while an image from the port chosen in the (1)
is on screen.
(1) Choose a picture input port using ▲/▼ cursor buttons.
• Choose the STANDBY, to select the
output signal from the MONITOR OUT port in the standby state.
(2) Select one of the COMPUTER IN ports using the ◄/► cursor
buttons.
Choosing the COMPUTER IN1 allows the following choice.
COMPUTER IN1 ó OFF
Choosing the COMPUTER IN2 allows the following choice.
COMPUTER IN2 ó OFF
Choosing other input or the STANDBY allows the following choice.
COMPUTER IN1 ó COMPUTER IN2 ó OFF
• The OFF disables the MONITOR OUT port.
COMPUTER IN1 ó COMPUTER IN2

STANDBY
 COMPONENT
VIDEO ó S-VIDEO ó (Y, Cb/Pb, Cr/Pr)