VocoPro DTX-9909K - Manual (Page 42)

42
• RVB TIME (Microphone DSP reverb time)
Use this setting to set the reverb time for the DSP micro-
phone reverb effect.
NOTE: The DSP effect volume must be set loud enough in
order to hear the effect
Use the Input/Adjust knob on the front panel or the and
buttons on the remote control to adjust the reverb time.
Reverb Time Range: 0 -- 0 0 80
1. Turn the Input/Adjust knob on the front panel clock-
wise or press the button on the remote control to
increase the reverb time.
2. Turn the Input/Adjust knob on the front panel counter-
clockwise or press the button on the remote control
decrease the reverb time.
• RVB VOLUME (Microphone DSP reverb volume)
This setting determines how much DSP reverb is present in
the microphone signal.
Use the Input/Adjust knob on the front panel or the and
buttons on the remote control to adjust the volume for
the DSP reverb effect.
Reverb Volume Range: 0 -- 80
1. Turn the Input/Adjust knob on the front panel clock-
wise or press the button on the remote control to
raise the reverb volume.
2. Turn the Input/Adjust knob on the front panel counter-
clockwise or press the button on the remote control to
lower the reverb volume.
• FB TIME (Reverb feedback time)
Use this setting to set the reverb feedback time for the DSP
microphone reverb effect.
NOTE: The DSP effect volume must be set loud enough in
order to hear the effect
Use the Input/Adjust knob on the front panel or the and
buttons on the remote control to adjust the reverb feed-
back time.
Feedback Time Range: 0ms -- 0ms 0ms 80ms
1. Turn the Input/Adjust knob on the front panel clock-
wise or press the button on the remote control to
increase the reverb feedback time.
2. Turn the Input/Adjust knob on the front panel counter-
clockwise or press the button on the remote control
decrease the reverb feedback time.
• OK (Karaoke output mode)
Use this setting to select which speakers will be used for
microphone output.
Use the Input/Adjust knob on the front panel or the and
buttons on the remote control to cycle through the avail-
able output modes.
Choices: L R, C, L R C, SL SR L R C, and SL SR C
L R - Microphone output will be in the Front Left and Front
Right speakers
C - Microphone output will be in the Center speaker
L R C - Microphone output will be in the Front Left, Front
Right, and Center speakers
SL SR L R C - Microphone output will be in the Surround
Left, Surround Right, Front Left, Front Right, and Center
speakers
SL SR C - Microphone output will be in the Surround Left,
Surround Right, and Center speakers
• FB EX (Feedback reducer)
Use this select which Feedback Reducer setting to use
Use the Input/Adjust knob on the front panel or the and
buttons on the remote control to cycle through the avail-
able Feedback Reducer settings: 1, 2, 3, and OFF
Karaoke Mode cont.