VeriFone NURIT 8400 - Manual (Page 28)

S ETUP
Connecting Cables
28 NURIT 8400 I NSTALLATION G UIDE
Connect one end of the RJ11 cable to the LINE socket at the back of the
NURIT 8400 and the other end to a standard RJ11 type modular telephone line
outlet.
Figure 19 NURIT 8400 Telephone Line Connection
Telephone Outlet Types
The following types of telephone outlets are common:
• Modular
This is the most common type of telephone outlet used. Plug the supplied
telephone cord from the terminal into a standard modular telephone
connector. If you do not have a modular connector, contact your local
telephone company or a qualified telephone technician.
• 4-Prong Connector
You must purchase a special adapter for use with a 4-prong connector. This
adapter plugs into a 4-prong connector and the telephone line cord plugs into
the adapter.
• Hard-wired
You must purchase a special modular connector adapter for this direct-type
hard-wire connection that replaces older connecting blocks. Contact your local
telephone company or a qualified telephone technician for correct information
on color-coded connections.
NOTE
Use only the telephone cord shipped with the terminal. Using a different
telephone cord may cause the terminal to malfunction.