VeriFone NURIT 8400 - Manual (Page 27)

S ETUP
Connecting Cables
NURIT 8400 I NSTALLATION G UIDE 27
To connect cables 1 Turn off the external device to which the terminal is to be connected and/or
disconnect the AC/DC power adapter form the AC electrical power outlet.
2 Remove the cable compartment cover. See Figure 6 .
3 Insert the plug into the appropriate connector on the terminal connections
panel.
4 Replace the cable compartment cover. See Figure 7 .
5 Insert the plug at the other end, into the external device.
6 Turn on the external device and/or reconnect the AC/DC power adapter to
the AC electrical power outlet.
Telephone Line
Connection
The modem version of the NURIT 8400 must be connected to a telephone line in
order to dial-up. You may connect an external telephone to the terminal, so you
still have telephone access while using the unit. To connect an external telephone,
see
External Telephone Connection .
WARNING
When in the vicinity of a gas leak, do not use the NURIT 8400, a standalone
telephone, or a telephone connected to the terminal to report the leak.
CAUTION
Only use the assigned connection port, labeled LINE for telephone line
connections.
NOTE
It is recommended that you use a dedicated telephone line with the NURIT 8400.
In some models the external telephone is disabled during transactions.
NOTE
Cancel the call waiting service for the telephone line to which the NURIT 8400 is
connected. Contact your telephone company for information.