VeriFone NURIT 8400 - Manual (Page 18)

S ETUP
Installing SAM and SD Cards
18 NURIT 8400 I NSTALLATION G UIDE
9 If necessary, replace the battery pack. See Figure 11 .
10 Close the battery compartment cover. See Figure 4 .
To remove a SAM
card
1 Open the card holder, by following steps 1-4 of To install a SAM card and
remove the card.
2 Close the card holder by following steps 7-8 of To install a SAM card .
To install an SD card 1 Remove the battery pack/card compartment cover. See Figure 4 .
2 If necessary, remove the battery pack. See Figure 12 .
3 Hold the SD card directly above the SD card slot, with the metal contacts
facing down and the narrow edge with the beveled corner pointing towards
the slot opening.
4 Lower the SD card into position.
5 Press down on the SD card while sliding it into the slot, until the card snaps
into place.
Figure 9 Inserting the SD Card
6 If necessary, replace the battery pack. See Figure 11 .
7 Close the battery compartment cover. See Figure 4 .