Olympus IX2-ARCEVA User Manual

Page 13

Text mode
Original mode

IX2-ARCEVA

1 0

4. Write the name (or abbreviation) of the mounted filter on one of the

provided handwritten indication stickers and attach it to one of the sticker
attaching positions … (position on the left or right of the position in which
the filter is mounted).
In the above case, attach the sticker to the position on the left of the filter
position because the left side comes near the slider inlet when the slider
is set on the illuminator.

Replacing the Modules Provided with the IX2-RFAL

}Replace the following modules as shown in the illustration on page 6.

· Aperture iris diaphragm: Remove the attaching screw and replace with

the slit iris diaphragm unit.

· Filter slider (aperture iris diaphragm side): Remove the slider knob and

replace with the wedge prism
slider.

· Filter slide (lamp housing side): Remove the slider knob and replace

with the excitation filter slider.

Fig. 4

…