Assembly – Olympus IX2-ARCEVA User Manual
Page 11

IX2-ARCEVA
8
ASSEMBLY
The filters and sliders are very hot during and immediately after use. Confirm that they are cooled down enough
before replacing them.
# When a commercially available, non-Olympus low reflection ND filter is used, the filter may sometimes be cracked
or burnt.
1
Attaching the Click Additional Parts
(Fig. 1)
1. Using the provided Allen wrench (width across flats 2 mm), remove the
screw, which functions as the cap, on the center of the bottom side of the
filter insertion slot of the IX2-RFAL.
2. Put the ball @ and spring ² into the center of the bottom side of the filter
insertion slot and fix them with the screw ³. Use the provided Allen wrench
for use in centering (width across flats: 3 mm) for clamping the screw.
Fig. 1
@
²
³