Uniden TRAX436 - Manual (Page 89)

Page 89
How Do I Use It?
This value appears on the map screen in the Trip Data area.
This is the value at the top.
This value appears on the map screen in the Trip Data area.
This is the value in the middle.
This value appears on the map screen in the Trip Data area.
This is the value at the bottom.
Trip Computer screen
The Trip Computer screen provides collected trip data. It can be opened
from the Trip Information screen by tapping .
The fields on this screen are continuously updated while you keep the
screen open.
You can switch between the trips, pause then resume them, or reset their
data.
You have the following functions on this screen:
Name Description
Pauses the trip currently shown on the screen. Values
on the screen stop changing.
This button replaces the previous one if it has been
activated. Tap it to resume collecting trip data.
Resets all counters of the currently shown trip.
Collecting trip data is restarted only when TRAX436
receives a position from the GPS.
,
Cycles through all trips.
Quick menu
The Quick menu is a selection of controls that are frequently needed during
navigation. It can be opened directly from the Map screen by tapping
.