Uniden TRAX436 - Manual (Page 111)

Page 111
How Do I Use It?
Type Description
Warn when
speeding
Maps may contain information about the speed limits
of the road segments. TRAX436 is able to warn you if
you exceed the current limit. This information may not
be available for your region (ask your local dealer), or
may not be fully correct for all roads in the map. This
setting lets you decide whether you wish to receive the
warnings. You can set the relative speeding at which the
application warns you (100% is the current speed limit):
• In Built-up Areas: in cities and towns
• Elsewhere: at all other locations
There are two types of warnings. You can turn them on
or off independently:
• Audible Warning: A voice message is played using the
selected voice guidance profile.
• Visible Warning: A symbol with the speed limit appears
in the corner of the map
(for example: ).
Speed
Camera
Warning
This feature allows you to receive a warning when
approaching a Road Safety Camera. You must ensure
on your own liability that using this feature is legal in
the country where you intend to use it. You have the
following options:
• Audible Warning: beeps can be played while you are
approaching the camera, or just alert sounds if you
exceed the speed limit while approaching one of these
cameras.
• Visible Warning: the type of the camera and the
controlled speed limit appears on the Map screen while
you are approaching one of these cameras.
Warn if Too
Fast for a
Pedestrian
Enable this warning to be alert if pedestrian mode is
activated and you drive fast. You are asked if you want
to change to car navigation mode. This way you can
be sure you will not be routed via one-way roads in the
wrong direction as a pedestrian could, for example.