UTStarcom PPC-6700 - Manual (Page 81)

80
|
Getting Connected
Connect through a USB Port
To connect through a USB port, you need to first set up a USB modem on your PC. Before
setting up a USB modem, verify that you have the following files:
• USBMDM
• USBModem_Dialer
Both files are available on the Getting Started CD. Run the Getting Started CD from the
CD-ROM of your PC and do the following on your device:
1. On your device, tap Start > Programs > Wireless Modem.
2. Select USB as the connection type, and insert the USB cable adapter.
3. Tap Start on the Wireless Modem screen of your device. The Found New Hardware
message appears on your PC.
4. On your PC, select Display a list of the known drivers for this device so that I can
choose a specific driver and click Next.
5. In the Hardware types list, select Modem and click Next.
6. Click Next.
7. Click Have Disk.
8. Click Next.
9. Select the recognized USB Modem from the Modems list.
10. Click Next.
11. Click Finish.
12. On your PC, select Start > Settings > Control Panel.
13. Double-click Phone and Modem Options.
14. Select the new USB modem from the Modems list.
15. Double-click the USB Modem Dialer file on the Getting Started CD.
16. To access the Internet dial #777, please contact to your ISP for the correct username
and password.
17. Click Dial to start the connection.
18. Click Finish to exit the wizard.