UTStarcom PPC-6700 - Manual (Page 71)

70
|
Getting Connected
2. Tap Start > Settings > Connections tab > Connections.
3. In My Work Network, follow the instructions for each type of connection.
4. Complete the connection wizard, and then tap Finish.
To start browsing the Internet
• When the connection settings are completed, tap Start > Programs > Internet
Explorer.
To reset or modify the network card settings on your device
1.
Tap Start > Settings > Connections tab > Network Cards.
2. In the My network card connects to list, select the appropriate item:
• If you want to connect to the Internet using your ISP, select The Internet.
• If you want to connect to a private network, select Work.
3. In Tap an adapter to modify settings, tap the appropriate adapter. The fields on the
IP Address tab are populated automatically.
4. Configure the TCP/IP settings (if required). If your ISP or private network does not
use dynamically-assigned IP addresses, tap Use specific IP address and enter the
requested information. Contact your ISP or network administrator to obtain the IP
address, subnet mask, and/or default gateway (if required).
5. Configure the DNS and WINS settings (if required). If your ISP or private network
does not use dynamically-assigned IP addresses, enter the requested information on
the Name Servers tab. Servers that require an assigned IP address may also require
a way to map computer names to IP addresses. DNS and WINS are the resolution
options supported on your device.