Adjusting the audio, Using the srs wow™ surround sound feature, Using the stablesound – Toshiba 51H93 User Manual
Page 78: Feature, Resetting your audio adjustments, Continued)
Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.
78
Chapter 8: Using the TV’s features
________
SRS, WOW and the
symbol are trademarks of SRS Labs, Inc.
SRS WOW technology is incorporated under license from SRS Labs, Inc.
Using the SRS WOW™ surround sound
feature
WOW is a special combination of SRS Labs audio technologies
(SRS 3D, FOCUS, and TruBass) that creates a thrilling
surround sound experience with deep, rich bass from stereo
sound sources. Your TV’s audio will sound fuller, richer, and
wider.
To adjust the WOW settings:
1. Put the TV in STEREO mode (see “Selecting stereo/SAP
broadcasts” on page 76).
2. Press MENU and open the AUDIO menu.
3. Highlight ADVANCED AUDIO SETTINGS and press
ENTER.
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
Advanced Audio Settings
SRS WOW: 3D
SRS WOW: Focus
SRS WOW TruBass
Save
Done
Reset
On
On
High
4. Press
z or y to highlight the WOW feature you want to
adjust, and then press
x or • to adjust the item.
• 3D — To turn the surround sound effect on or off.
Note: If the broadcast is monaural, the 3D effect does not
work.
• Focus — To turn the vocal emphasis effect on or off.
• TruBass — To select the desired bass expansion level
(HIGH, LOW, or OFF).
5. To temporarily save the new settings, highlight DONE and
press ENTER. To permanently save the new settings,
highlight SAVE and press ENTER.
To reset the WOW settings:
Highlight RESET in the Advanced Audio Settings menu
and press ENTER.
Advanced Audio Settings
SRS WOW: 3D
SRS WOW: Focus
SRS WOW TruBass
Save
Done
Reset
Off
Off
Off
Adjusting the audio
(continued)
Using the StableSound
®
feature
The StableSound
®
feature limits the highest volume level to
prevent extreme changes in volume when the signal source
changes (for example, to prevent the sudden increase in volume
that often happens when a TV program switches to a
commercial).
To turn on the StableSound
®
feature:
1. Press MENU and open the AUDIO menu.
2. Highlight AUDIO SETTINGS and press ENTER.
3. Press
z to highlight STABLE SOUND, and then press •
to select ON.
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
Audio Settings
Bass
Treble
Balance
SBS
SBS Level
StableSound
Save
Done
Reset
On
On
50
50
0
50
4. To temporarily save the new settings, highlight DONE and
press ENTER. To permanently save the new settings,
highlight SAVE and press ENTER.
To turn off the StableSound feature:
Select OFF in step 3 above.
Resetting your audio adjustments
The RESET function returns your audio adjustments to the
following factory settings:
Bass ............. center (50)
Treble .......... center (50)
Balance ........ center (0)
To reset your audio adjustments:
1. Press MENU and open the AUDIO menu.
2. Highlight AUDIO SETTINGS and press ENTER.
3. Press
z to highlight RESET and press ENTER.
Audio Settings
Bass
Treble
Balance
SBS
SBS Level
StableSound
Save
Done
Reset
On
Off
50
50
0
70
4. To temporarily save the new settings, highlight DONE and
press ENTER. To permanently save the new settings,
highlight SAVE and press ENTER.
SBS ................ ON
SBS Level ...... 70
StableSound ... OFF