beautypg.com

Adjusting the picture, Selecting the picture mode, Adjusting the picture quality – Toshiba 51H93 User Manual

Page 72: Resetting the picture settings

background image

Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.

72

Chapter 8: Using the TV’s features

Adjusting the picture

Selecting the picture mode

You can select your desired picture settings from four picture
modes, as described below.

To select the picture mode:

1. Press MENU and open the VIDEO menu.
2. Highlight PICTURE SETTINGS and press ENTER.

Video

Picture Settings

Theater Settings

Advanced Picture Settings

3. Press

z to highlight the MODE field, and then x • to

select the mode you prefer.

Picture Settings ANT 1

Mode

Contrast

Brightness

Color

Tint

Sharpness

Save

Done

Reset

Preference

50

50

50

0

50

4. To temporarily save the mode you selected, highlight

DONE and press ENTER.
To permanently save the mode you selected, highlight
SAVE and press ENTER.

Note:

• The picture mode you selected is for the current input

selection only (ANT 1 in the example above). You can select
a different picture mode for each input selection.

• If you select one of the factory-set picture modes (SPORTS,

STANDARD, or MOVIE) and then change a picture quality
setting (for example, increase the contrast), the picture mode
automatically changes to PREFERENCE in the Picture
Settings menu.

Adjusting the picture quality

You can adjust the picture quality (contrast, brightness, color,
tint, and sharpness) to your personal preferences.

To adjust the picture quality:

1. Press MENU and open the VIDEO menu.
2. Highlight PICTURE SETTINGS and press ENTER.

Video

Picture Settings

Theater Settings

Advanced Picture Settings

3. Press

z or y to select the picture quality you want to adjust

(CONTRAST, BRIGHTNESS, COLOR, TINT, or
SHARPNESS), and then

x and • to adjust the setting, as

described in the table below.

Picture Settings ANT 1

Mode

Contrast

Brightness

Color

Tint

Sharpness

Save

Done

Reset

Sports

100

50

50

0

50

4. To temporarily save the new settings, highlight DONE and

press ENTER. To permanently save the new settings,
highlight SAVE and press ENTER.

Note: The settings you selected are for the current input selection
only (ANT 1 in the example above). You can select different
settings for each input selection.

The picture qualities you adjusted are automatically saved in the
PREFERENCE mode (see “Selecting the picture mode” above).

Resetting the picture settings

To reset the picture settings to
their factory values:

Highlight RESET in the Picture
Settings menu and press
ENTER.

Note: This resets the pictures
settings for the current input source
only (ANT 1 in this example).

Selection

x Pressing

contrast

lower

higher

brightness

darker

lighter

color

paler

deeper

tint

reddish

greenish

sharpness

softer

sharper

Mode

Picture Quality

Sports

Bright and dynamic picture (factory setting)

Standard

Standard picture settings (factory setting)

Movie

Lower contrast for darkened room (factory setting)

Preference

Your personal preferences

Picture Settings

Mode

Contrast

Brightness

Color

Tint

Sharpness

Save

Done

Reset

Sports

100

50

50

0

50

ANT 1