Using the remote control, Learning about the remote control – Toshiba 51H93 User Manual
Page 26
Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.
26
Using the remote control
3
Note:
The error message “Not Available” will
appear if you press a key for a function
that is not available.
CT-90168
VCR
+
REC
+
PAGE –
ACTION
ENTER
MENU
THEATER
NET
FAV
SPLIT POP DIRECT CH FREEZE
SWAP
CH SCAN
SOURCE
POP CH
–
100
+10
The buttons used for operating the TV only are described here. For a complete list
of the remote control’s functions, see the remote control functional key chart on
pages 28–29.
POWER
turns the TV on and off
SLEEP
accesses the sleep timer (page 82)
LIGHT
The first press of the LIGHT button lights the keypad and turns on the
Illumination mode. With the Illumination mode on, pressing any other key lights the
keypad for 5 seconds (10 seconds if you’re in programming mode). Subsequent presses
of the LIGHT button toggle between turning the Illumination mode on and off.
Channel Numbers (0–9, 100)
directly access channels (page 42)
MODE
cycles through the six device modes: TV, CABLE/SAT, VCR, DVD, AUDIO1,
and AUDIO2. The mode indicator light will remain lit for a few seconds (page 20).
PIC SIZE
cycles through the five pictures sizes: Natural, Theater Wide 1/2/3, and Full
(page 64)
THEATER NET
accesses the on-screen IR device control icons (page 46)
MENU
accesses the menu system (page 35)
GUIDE
opens the TV Guide On Screen system (page 53)
INFO
provides detailed information on highlighted items (page 55)
BLUE and GREEN buttons
select menu-specific functions in the TV Guide On Screen
system (page 55)
ENTER
sets menu adjustments
yz x •
select or adjust programming menus
FAV
accesses the favorite channel search function (page 44)
CH
yz
cycles through programmed channels when no menu is on-screen (page 42);
functions as page up/down when a menu is on-screen or when the TV Guide
On Screen system is open (page 53)
VOL
yz
adjusts the volume level
EXIT
closes on-screen menus and the TV Guide On Screen system
CH RTN
returns to the last viewed channels (page 63)
INPUT
selects the video input source (page 61)
RECALL
displays TV setting information on-screen (page 83)
MUTE
reduces or turns off the sound (page 76)
TV/VCR
press to select TV mode to view one program while recording another
SPLIT
turns the POP feature on and off (page 68)
POP CH
yz
selects the POP (picture-out-picture) channel (page 68)
POP DIRECT CH
allows direct access to POP channels (page 68)
FREEZE
freezes the POP picture (page 69)
SWAP
switches the main and POP pictures (page 69)
CH SCAN
allows access to the programmed channel search function (page 70)
SOURCE
selects the POP picture source (page 68)
Learning about the remote control