Toshiba 51H93 - Manual (Page 36)

Copyright © 2003 TOSHIBA CORPORATION. All rights reserved. 36
This section includes instructions on using the Quick Connect
Guide to assist you in configuring the following basic settings for
your TV:
– Choosing your preferred language (English, French, or
Spanish) for on-screen menus. (See Chapter 7 for details
on this feature.)
– Setting up the TV Guide On Screen ™ interactive program
guide. (See Chapter 7 for details on this feature.)
The Quick Connect Guide automatically starts the first time the
TV is turned on.
Note: If you have not already connected your devices and
cables to your TV, turn off your TV, unplug the power cord, and
connect your devices according to the applicable connection
diagram in Section 2. If you turned on the TV before connecting
your devices and the Quick Connect Guide assisted setup
already began, you will have to manually restart the Quick
Connect Guide (see below) after you connect your devices.
If this is the first time you have turned on your TV and the
Quick Connect Guide is already on-screen, start at “Selecting
the menu language” at right.
If you change your TV’s input source or connections, you also
can manually start the Quick Connect Guide to assist you in
updating your TV’s settings. To do this, start at “Manually
starting the Quick Connect Guide assisted setup” below.
Note: To stop the Quick Connect Guide, press EXIT or turn off
the TV.
Manually starting the Quick Connect Guide
assisted setup
1. Press MENU and open the SETUP menu.
2. Highlight INSTALLATION and press ENTER. (A new set
of INSTALLATION menu icons will appear on-screen, as
shown in step 3.)
Setup
Installation
Sleep Timer
On/Off Timer
Digital Tuner Hold • • • • • • • Off
Slide Show Interval • • • 2 Sec
Convergence
3. Open the QUICK CONNECT menu, highlight START,
and then press ENTER.
Quick Connect
Start
If you already set up the TV Guide On Screen system, go to
page 40.
Selecting the menu language
1. Press yzx • to highlight the language you want to use for
on-screen menus and messages (English, Español, or
Français), and then press ENTER.
Quick Connect Guide
Welcome to the TOSHIBA Quick Connect Guide.
This Guide will take you through the initial setup
of your TV.
To end Quick Connect Guide, press the EXIT key.
Please choose a language.
English Francais Español
2. Press ENTER to continue.
The TV Guide On Screen setup begins.
(Continued on next page)
Starting the Quick Connect Guide assisted setup
Quick Connect Guide & TV Guide On Screen ™ setup 5
– Configuring the antenna input sources. (See Chapter 6
for details on this feature.)
– Automatically programming channels into the TV’s
channel memory (See Chapter 6 for details on this
feature.)
– Choosing your preferred picture mode (See Chapter 8 for
details on this feature.)
Note: Review “Navigating the menu system” on the previous page.